Relay Board And Cooling Fan Removal - Epson Stylus COLOR 900 Service Manual

EPSON Stylus COLOR 900/900N

4.2.5 Relay Board and Cooling Fan Removal

1. Remove the main board. (See
2. Remove all connectors from the relay board. (See
connecting them.)
3. Remove the two screws securing the relay board to the shield plate
on the C265 Main board, and then remove the relay board.
4. Remove the three screws securing the cooling fan unit to the shield
plate on the C265 main board, and then separate the cooling fan
from the C265 Main board.
5. Disconnect connector CN13 (white, 2-pin) from the main board, and
then remove the cooling fan unit.
page 94.)
Figure 4-5 when
Screws securing the
Cooling Fan Unit
Figure 4-8. Relay Board and Cooling Fan Removal
Chapter 4 Disassembly and Assembly
Screws securing the Relay Board
Relay Board
CN13
Cooling Fan Unit
95