Table of Contents
Advertisement
3 Commissioning
3.2 Commissioning the DP master
Installing
"SimoCom A"
Un–installing
"SimoCom A"
Online operation,
"SimoCom A" with
drive
3-80
This is how you install the "SimoCom A" tool on your PG/PC:
Reader's note
The "readme.txt" file is provided on the software CD.
Please observe the information, tips and tricks provided in this file.
1. Insert the software CD into the appropriate drive of your PG/PC.
2. Run the "setup.exe" file in directory "disk1" for the required version
of "SimoCom A".
–> START –> RUN –> OPEN SETUP.EXE –> OK
3. Follow the instructions which the installation program displays step–
by–step.
Result:
– The "SimoCom A" tool has now been installed in the target direc-
tory which you selected.
– The tool can e.g. be started as follows:
–> START –> PROGRAM –> SIMOCOMA
–> SimoComA –> mouse click
This is how you can un–install the "SimoCom A" parameterizing and
start–up tool from your PG/PC:
S
Using the program/operation of "SimoCom A"
The "SimoCom A" tool can be e.g. un–installed as follows:
–> START –> PROGRAMS –> SIMOCOMA
–> Uninstall SimoComA –> mouse click
S
Using the Control Panel just like any other Windows program
– Select the "control panel"
–> START –> SETTINGS –> CONTROL PANEL
– Double–click on the "Software" symbol
– Select the "SimoCom A" program from the selection field
– Press the "add/remove..." button and then follow the instructions
You can go into online operation as follows:
S
Online operation via the CP 5511/CP 5611 directly with the fieldbus
PC/PG <––> CP 5511/CP 5611 <––> PROFIBUS <––> drives
S
Online operation via the MPI interface of SIMATIC S7
PC/PG <––> MPI <––> PROFIBUS <––> drives
SIMODRIVE POSMO A User Manual (POS1) – 08/2013 Edition
E Siemens AG 2013 All Rights Reserved
02.99
Advertisement
Table of Contents
