Parameterizing And Start-Up Tool "Simocom A" (From Sw 1.5) - Siemens SIMODRIVE POSMO A User Manual

05.13 08.03 02.99
3.2.3 Parameterizing and start–up tool "SimoCom A" (from SW 1.5)
Prerequisite A PG/PC is required to install the tool; it must fulfill the following minimum
requirements:
S
S
S
Where can I get The "SimoCom A" parameterizing and start–up tool is available through
"SimoCom A"? the Internet as follows:
S
S
Which version is The "SimoCom A" parameterizing and start–up tool can be used for all
the optimum SIMODRIVE POSMO A drives from SW 1.5 onwards.
"SimoCom A"
The functional scope of the "SimoCom A" tool is continually adapted to
version?
the expanded functionality of these drives.
In order to parameterize and handle all of the functions of a drive using
"SimoCom A", the optimum matching "SimoCom A" must be used. This
depends on the drive software release.
Reader's note
Which version of "SimoCom A" optimally matches which drive and
which drive software release?
Refer to "SimoCom A" as follows:
Help ––> info about "SimoCom A" ... ––> versions
E Siemens AG 2013 All Rights Reserved
SIMODRIVE POSMO A User Manual (POS1) – 08/2013 Edition
Operating system:
®
Windows XP
®
Windows Vista
®
Windows 7
32 MB RAM memory
30 MB free memory on the hard disk
German
http://support.automation.siemens.com/WW/view/
de/10804026/133100
English
http://support.automation.siemens.com/WW/view/
en/10804026/133100
3 Commissioning
3.2 Commissioning the DP master
3
3-79