Siemens SIMODRIVE POSMO A User Manual page 215

5 Description of the Functions
5.6 Parameters for SIMODRIVE POSMO A
P0034 / 22 Shift factor, test socket 1
300W 075W
Min Standard
0 7
Shift factor for analog test socket 1.
Note:
Shift factor change of +1 corresponds to doubling the value
Shift factor change by –1 corresponds to halving the value
The parameter value can be changed while traversing.
P0035 / 23 Offset, test socket 1
300W 075W
Min Standard
0 80
Offset for analog test socket 1.
Note:
With offset = 80 hex, for "0" 2.5 V is output.
The parameter value can be changed while traversing.
P0036 / 24 Address, test socket 2
300W 075W
Min Standard
0 FC66
Note:
Refer to P33 (address, test socket 1).
P0037 / 25 Shift factor, test socket 2
300W 075W
Min Standard
0 0
Note:
Refer to P34 (shift factor, test socket 1).
P0038 / 26 Offset, test socket 2
300W 075W
Min Standard
0 80
Note:
Refer to P35 (offset, test socket 1).
P0039 / 27 Position setpoint
300W 075W
Min Standard
– –
This parameter specifies the position setpoint in the selected unit of measurement.
5-214
Max Unit
F Hex
Max Unit
FF Hex
Max Unit
FFFFFFFF Hex
Max Unit
F Hex
Max Unit
FF Hex
Max Unit
– MSR
SIMODRIVE POSMO A User Manual (POS1) – 08/2013 Edition
Data type Effective
I2 immed.
Data type Effective
I2 immed.
Data type Effective
I4 immed.
Data type Effective
I2 immed.
Data type Effective
I2 immed.
Data type Effective
C4 RO
E Siemens AG 2013 All Rights Reserved
04.01 08.06 02.99