7 Installation and Service
7.3 Spare parts for SIMODRIVE POSMO A
7.3.2
Drive unit as spare part (only the 300 W motor)
Replacing the
drive unit
Gearboxes
not to scale
Fig. 7-1
Replacing the drive unit
What is required to
replace the drive
unit?
7-258
We recommend the following procedure if a drive unit is to replaced:
2 slotted screws
4 (1.0 x 6.5)
Connection cover
4 self–tapping Allen keys
M4 x 16
SW 3
2.5 – 3 Nm
Motor
Reader's note
Up–to–date and binding information on this subject should be taken
from the documentation provided with the spare parts "Installation and
mounting instructions, replacing the drive unit".
The following are required to replace the drive unit:
1. Tools
– Screwdriver
– Allen key
2. New drive unit
3. Parameter sets of the old drive unit (save and make available)
SIMODRIVE POSMO A User Manual (POS1) – 08/2013 Edition
Size 4 (1.0 x 6.5)
SW 3
E Siemens AG 2013 All Rights Reserved
04.01
06.05
Drive unit