Table of Contents
Advertisement
06.05
05.13
Proper use
!
Further
information
!
E Siemens AG 2013 All Rights Reserved
SIMODRIVE POSMO A User Manual (POS1) – 08/2013 Edition
Note the following:
Warning
Siemens products may only be used for the applications specified in
the catalog and in the associated technical documentation. If
third–party products and components are used, they must be
recommended or approved by Siemens. These products can only
function correctly and safely if they are transported, stored, set up,
mounted, installed, commissioned, operated and maintained correctly.
The permissible ambient conditions must be complied with. The
information in the relevant documentation must be observed.
Note
This symbol indicates important information about the product or part
of the document, where the reader should take special note.
Reader's note
This symbol is shown, if it relates to important information which the
reader must observe.
Technical information
Warning
When electrical equipment is operated, certain parts of this equipment
are inevitably under dangerous voltage.
Incorrect handling of these units, i.e. not observing the warning
information, can therefore lead to death, severe bodily injury or
significant material damage.
Only appropriately qualified personnel may commission/start up this
equipment.
This personnel must have in–depth knowledge regarding all of the
warning information and service measures according to this operating
instructions.
Perfect, safe and reliable operation of the equipment assumes that it
has been professionally transported, stored, mounted and installed as
well as carefully operated and serviced.
Hazardous axis motion can occur when working with the equipment.
Foreword
xi
Advertisement
Table of Contents
