E Index - Siemens SIMODRIVE POSMO A User Manual

E Index

Connection module
as spare part (300 W motor), 7-257
as spare part (75 W motor), 7-257
Replacing, 7-260
Connection overview, 2-43
Consistent data transfer, 4-130
Continuous duty S1, 2-65, 2-68
Control authority (from SW 1.5), 3-85
Current documentation, iii
D
Danger information, x
Data transfer
Consistent, 4-130
Inconsistent, 4-130
Data type, 4-123, 5-201
DC-PMM, 2-38
DC-PMM_E/48V, 2-39
Declaration of Conformity, D-283
Device identification, ix
Diagnosis
LED, 1-21, 6-233
PROFIBUS, 6-252
Difference 75/300 W motor, 1-23
Digital inputs/outputs
Connecting–up, 2-43
Description, 5-182
Rules, 5-183
Status (from SW 1.4), 4-112, 5-183
Digital outputs, 5-182
Dimension drawing, C-271
300 W motor
with planetary gearbox 1–stage,
C-277
with planetary gearbox 2–stage,
C-277
with planetary gearbox 3–stage,
C-278
without gearbox, C-276
75 W motor
with planetary gearbox, C-273
with worm gearbox, C-274
without gearbox, C-272
Dimension drawing, extension set, "separate
version", 300 W motor
with planetary gearbox 1–stage, C-280
with planetary gearbox 2–stage, C-280
with planetary gearbox 3–stage, C-281
without gearbox, C-279
Direction of rotation definition, motor, 5-153
E-288
Direction of rotation reversal, 5-143
Display terminal status (from SW 1.4),
4-112, 5-183
Drive unit
as spare part (300 W motor), 7-257,
7-259
Replacing (300 W motor), 7-259, 7-261
E
EC Declaration of Conformity, D-283
Effective, 5-201
Electrical design
Coincidence factor, 2-35
i2t limiting, 2-36
Power supply, 2-31
Regenerative feedback protection, 2-37
ESDS information and instructions, xiii
Establish communications, 3-75
Establish factory default setting, 5-200
Expert list (from SW 1.5), 3-87
Explanation of symbols, x
External block change, 4-106
F
Fault evaluation, 6-233, 6-234
Fault LED, 6-233
Fault suppression, 6-236
Faults, 6-235
Acknowledgment?, 4-105, 4-108, 6-235
Bits and numbers, 6-234
Difference to warnings, 6-235
Evaluating via PROFIBUS?, 6-235
Overview, 6-234
Status signal (ZSW.3), 4-110, 4-113,
6-235
Which ones apply here?, 6-234
Firmware version, ix
Flying actual value setting (from SW 1.4),
5-170
Flying measurement (from SW 1.4), 5-166
Function block, 1-22, 3-78
FB 10 (CONTROL_POSMO_A, from
02.00), 3-78
FB 11 (PARAMETERIZE_POSMO_A,
from 02.00), 3-78
FB 12 (PARAMETER-
IZE_ALL_POSMO_A, from 05.00),
3-78
E Siemens AG 2013 All Rights Reserved
SIMODRIVE POSMO A User Manual (POS1) – 08/2013 Edition
08.06 10.07 06.05