Omron OMNUC W Series User Manual page 85

Standard Models and Specifications
Using External Power Supply
Note Select a value for resistance R so that the input current will be from 7 to 15 mA.
D Sensor ON Inputs [Absolute]
7406 or equivalent
Signal Levels High: 4 V min.
Low: 0.8 V max.
Note A PNP transistor is recommended.
D Sequence Inputs
External power supply:
24 V ± 1 V DC
Power supply capacity:
50 mA min. (per Unit)
To other input circuit GNDs
Signal Levels ON level: Minimum (+24VIN--11) V
OFF level: Maximum (+24VIN--1) V
AUDIN - 7 bis rue de Tinqueux - 51100 Reims - France - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : info@audin.fr
Controller Servo Driver
Vcc
24 V
12 V
5 V
High: Approx. 1 mA
Servo Driver
To other input circuits
Input current: 7 to 15 mA
2.2 kΩ
1 kΩ
180 Ω
Servo Driver
Input current: 5 V DC, 1 mA
Photocoupler input: 24 V DC, 7 mA
Chapter 2
R
2-59