Omron OMNUC W Series User Manual page 255

Operation
Pn50F.1 Output signal selection 2 --- VLIMT signal (speed limit detection) output terminal allocation
(Torque)
Setting 0 to 3
range
Pn50F.2 Output signal selection 2 --- BKIR signal (brake interlock) output terminal signal (All operation
modes)
Setting 0 to 3
range
Pn50F.3 Output signal selection 2 --- WARN signal (warning) output terminal allocation (All operation
modes)
Setting 0 to 3
range
Pn510.0 Output signal selection 3 --- INP2 (positioning completed 2) output terminal allocation
(Position)
Setting 0 to 3
range
• Parameter settings are the same as for Pn50E.0.
• The WARN (alarm output) signal is normally ON, and turns OFF when an alarm occurs.
Pn512.0 Output signal reverse --- Pins CN1-25 and 26 output signal reverse (All operation modes)
Setting 0, 1
range
Setting Explanation
Setting
0 Not reversed.
1 Reversed.
• Select the characteristics of the output signal allocated to pins CN1-25 and 26.
• If you set 1 (reverse), ON/OFF outputs are reversed.
Pn512.1 Output signal reverse-Pins CN1-27 and 28 output signal reverse (All operation modes)
Setting 0, 1
range
Setting Explanation
Setting
0 Not reversed.
1 Reversed.
Pn512.2 Output signal reverse --- Pins CN1-29 and 30 output signal reverse (All operation modes)
Setting 0, 1
range
Setting Explanation
Setting
0 Not reversed.
1 Reversed.
AUDIN - 7 bis rue de Tinqueux - 51100 Reims - France - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : info@audin.fr
Unit ---
Unit ---
Unit ---
Unit ---
Unit ---
Unit ---
Unit ---
Default 0
setting
Default 0
setting
Default 0
setting
Default 0
setting
Default 0
setting
Explanation
Default 0
setting
Explanation
Default 0
setting
Explanation
Chapter 4
Restart Yes
power?
Restart Yes
power?
Restart Yes
power?
Restart Yes
power?
Restart Yes
power?
Restart Yes
power?
Restart Yes
power?
4-39