Omron OMNUC W Series User Manual page 177
Ac servomotors/servo drivers
Hide thumbs
Also See for OMNUC W Series:
- Manual (292 pages) ,
- User manual (43 pages) ,
- User manual (484 pages)
Table of Contents
Advertisement
System Design and Installation
H Selecting Connecting Cables
1. Motion Control Unit Cable
There are special cables for 1-axis and 2-axis Motion Control Unit operation. Select the appropriate
cable for the number of axes to be connected.
Motion Control Unit
CS1W-MC221/421
CV500-MC221/421
C200H-MC221
C200H-MC221
2. Servo Relay Unit Cable
Select a Servo Relay Unit and Cable to match the Position Control Unit that is to be used.
Position Control Unit
C200H-NC112
C200HW-NC113
C200HW-NC213
C200HW-NC413
C200H-NC211
C500-NC113
C500-NC211
Note 1. The empty boxes in the model numbers are for cable length. The cables can be 0.5 or 1 meter
long. (For example, XW2Z-050J-A1 is 0.5 meter long.)
Note 2. When 2-axis control is used with C200HW-NC213, C200HW-NC413, C200H-NC211, or
C500-NC211 Position Control Units, two cables are required to the Servo Driver.
3. Connector- -Terminal Block Cables
These cables are used for connecting to Controllers for which no special cable is provided. The cables
and terminal block convert the Servo Driver's Control I/O Connector (CN1) signals to terminal block
connections.
Connector Terminal Block
XW2B-50G5
4. General Control Cable and Control I/O Connector
These cables and connector are used for connecting to Controllers for which no special cable is provi-
ded, and when the cable for the Servo Driver's control I/O connector is prepared by the user.
AUDIN - 7 bis rue de Tinqueux - 51100 Reims - France - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : info@audin.fr
Cable
For 1 axis
R88A-CPWjjjM1
For 2 axes
R88A-CPWjjjM2
Cable to Position
Control Unit
XW2Z-jjjJ-A1
XW2Z-jjjJ-A6
XW2Z-jjjJ-A7
XW2Z-jjjJ-A2
Cable
R88A-CTWjjjN
The empty boxes in the model
numbers are for cable length. The
cables can be 1, 2, 3, or 5 meters
cables can be 1 2 3 or 5 meters
long. (For example, R88A-CPW002M1
is for one axis and is 2 meters long.)
Servo Relay Unit
XW2B-20J6-1B
XW2B-40J6-2B
Remarks
The empty boxes in the model numbers are for
cable length. The cables can be 1 or 2 meters
long. (For example, R88A-CTW002N is 2
meters long.)
Chapter 3
Remarks
Cable to Servo Driver
XW2Z-jjjJ-B4
3-11
Advertisement
Table of Contents
Troubleshooting
