Omron OMNUC W Series User Manual page 328

Operation
D Switching to Monitor Mode
Status Display Mode
System Check Mode
Setting Mode
Monitor Mode
D Operations in Monitor Mode
Speed feedback
Speed command
Torque command
Operating Procedure Example: Displaying Monitor Value of Electrical Angle (Un.004)
PR02W Front panel
operation key operation
(1 s min.)
(1 s min.)
Note Digits that can be manipulated will flash.
4-112
AUDIN - 7 bis rue de Tinqueux - 51100 Reims - France - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : info@audin.fr
Note Switch to Monitor Mode (Un.jjj) using the MODE/SET
Key.
1 s min.
1 s min.
1 s min.
Note After setting the monitor number using the Up and Down
Keys, press the DATA Key (front panel: DATA Key for 1 s min.)
to display the monitor value. Press the Key again to return to
the monitor number display.
Display
(Status Display Mode)
Press the MODE SET Key to switch to Monitor Mode.
Set monitor No. Un004 using the Up or Down Key. (See
note.)
Press the DATA Key (front panel: DATA Key for 1 s min.)
to display monitor value for Un004 (electrical angle).
Press the DATA Key (front panel: DATA Key for 1 s min.)
to return to monitor number display.
Chapter 4
Speed feedback moni-
tor value
Speed command moni-
tor value
Torque command moni-
tor value
Explanation