Stereo Channel Fader Unfold On Grand Masters - Studer Vista 1 Operating Instructions Manual

Vista 1 Digital Mixing System
2.2.5.15

stereo Channel fader Unfold on Grand Masters

2-42 Desk Operation
From SW V5.3 onwards, an exceptional use is made of the Grand Master
faders. The Grand Master faders can optionally be used to display and adjust
L and R fader values from any stereo channel.
This functionality that can used on any stereo channel (input, group, aux,
master) is described as follows :
In addition to the settable input gain of each stereo channel leg, also a fader
value offset can be set individually for the L and R channel leg.
With the Vista Setting "Stereo Channel Fader on Grand Masters" the operator
can press the CHANNEL VIEW key to unfold the stereo channel onto the Grand
Master strips of the ControlBay. The CHANNEL VIEW key then is flashing and
the two Grand Master faders are temporarily representing the separate L and
R offset fader values of that stereo channel. Now the L and R offset values
can be adjusted.
SW V5.3 Document generated: 18.04.17