Vista 1 Digital Mixing System
The control bay TFT metering is of multiple use. The VIEW keys together with
Control Bay
the (shift) key allow switching between different views. All VIEW keys are
of the momentary/latching type.
The FOLLOW key displays the metering that belongs to the channel assigned
to the desk surface.
Then, there are view keys for all different type of master channels: Aux,
Groups, program Masters, Matrix, etc., as well as output meter views of
multitrack and n-1/x busses.
Moreover, there are four user keys that allow displaying any choice of chan-
nels of the mixing console on the four user pages. For assignment there is a
page on the GC's Strip Setup window that lets assign up to 10 channels on
the USER 1 page, up to 20 channels in two rows on the USER 2 page, and
a maximum of 40 half-width channels in two rows on both the USER 3 and
USER 4 pages.
The two meter slots at the right of the control bay TFT screen, however, con-
tinuously show PFL and CR levels.
Setup
TFT meter bridge setup information is given in
chapter 4.4.6.1.6.
Desk Operation 2-65
Document generated: 18.04.17
SW V5.3