Loading Effects - Studer Vista 1 Operating Instructions Manual

Vista 1 Digital Mixing System
9.3.5

Loading effects

Effect Type :
On/Off - Copy/Paste :
Effect Parameters :
1-12 Vista 1 FX
2.
Operate the FX parameters from the FX icon in the Vistonics touch area.
3. Activate the channels Insert On/Off.
4. Use the effects wet/dry Mix parameter to blend the processed signal to the
dry signal to get the desired resulting sound.
When touching into the FX icon area of the Vistonics, a number of blue
coloured Vistonics rotaries and icon areas are opened up. This area is always
4 x 4 Vistonics rotaries wide. It is divided into the following areas :
Category : The Vista effect types are grouped into categories. Each category has its own
set of effect types.
Effect types are defined Lexicon factory presets, which can only be loaded.
Effect types cannot be stored as user presets - as is normally possible with
standalone effect units.
When effect parameters are adapted to the users needs - they can be stored
within a snapshot. Effect types always remain as they originally have been
designed by Lexicon. Once any of the parameters have been changed , the
Load button is changed and becomes a Clear button. By pressing Clear,
all parameters are cleared back to the original Effect type values.
Mix :
Adjusts the proportion of wet (processed) signal to dry (unprocessed) signal.
Ranges from 0% (all dry) to 100% (all wet). With send-return effects, you
will leave this at 100% wet, and with insert-effects, the desired dry/wet blend
can be created.
Here, the effect processing is switched On or Off.
Please note, that the default state of the processing is Off !
The small Vistonics button has the function of a copy/paste button. With
the copy/paste button, effect settings can be copied from effect machine to
machine - or into the clibboard library.
In this area, all effect parameters are displayed and can be controlled from
the Vistonics rotaries and buttons.
SW V5.3 Document generated: 18.04.17