Expander / Gate Parameters - Studer Vista 1 Operating Instructions Manual

Vista 1 Digital Mixing System
3.3.8.2

Expander / Gate Parameters

Standard Dynamics Section
eXP ThRs Rotary
eXP on/off
eXP RTIo Rotary
GaTe ThRs Rotary
GaTe on/off
GaTe aTCK Rotary
3-18 Parameters
Press GLOBAL VIEW: EXP GATE.
This view enables the user to control the most important parameters of the
dynamics section's expander and gate parts. The complete parameter set is
available on the channel-related dynamics view, refer to
you will also find all the parameter details.
For 5.1 surround channels, the expander and gate settings are valid for all
surround signal legs except the LFE. For further information on this subject,
please refer to chapter
note The expander and gate parts of the dynamics section can be activated
simultaneously with the EXP GATE hardware key above the Viston-
ics section, in addition to the individual on/off keys described below.
The expander threshold level can be adjusted in 1 dB steps from 0 dB
–96 dB .
FS
Expander on/off.
The expander ratio can be adjusted from 1:1 (no expansion) to 20:1 (heavy
expansion).
The gate threshold level can be adjusted in 1 dB steps from 0 dB
–96 dB .
FS
Gate on/off.
The gate attack time can be adjusted in 9 steps within a 200 µs to 1 ms range.
SW V5.3
3.4.3.2.
chapter 3.4.3. There
to
FS
to
FS
Document generated: 18.04.17