Editing The User Labels In The General Patch - Studer Vista 1 Operating Instructions Manual

Vista 1 Digital Mixing System
Connection Protection
4.4.2.5

Editing the User labels in the General Patch

4-22 GC Operation
It is also possible to protect a certain connection from accidental change both
by the user or by recalling a snapshot.
Double-clicking on a connection selects the padlock item to lock the connec-
tion. To unlock, double-click again.
Both the background of the Target as well as the connection become red.
When attempting to change a protected connection, a warning appears,
together with the instructions on how to unprotect the connection.
In order to edit the user labels in the General Patch view, right-click on the
desired Source or Target in the Sources/Targets list.
Click on the Edit Label field of the Source or Target and select the User label.
This will open a dialog box that allows editing a user label, such as changing
it from 'Stagebox Mic 01' to 'Snare':
To automatically move to the next Source/Target in the list, either click on
'Next' or hit ENTER on the keyboard. To close the dialog box click on 'OK'.
It is possible to choose a Source/Target from the General Patch list without
closing the Edit User Label dialog box. Simply click on the desired Source/
Target from the General Patch list with the window still open. This will auto-
matically enter it into the window for editing.
A click on 'Reset' will restore the 'Inp m 1 In1' default user label.
User Labels with up to 13 characters (depending on the width of the individual
characters) can be used for Input sources. These User Labels can then also be
shown in the Vistonics area of each channel strip.
SW V5.3 Document generated: 18.04.17