Studer Vista 1 Operating Instructions Manual page 67

EXT PFL SPEAKER
Document generated: 18.04.17
normally shows the control room listening level. Turn the knob below the
display for adjustment of solo offset level.
CLR If any of the PLF or SOLO keys on the console is active (even if it is currently
not visible on the surface), this key will be lit. Pressing it clears all activated
PLF/SOLO functions on the channels.
This rotary control adjusts the level of the PFL signal going to the near-field
speakers. The near-field speakers are also used for listening to talkback return
signals.
PFL TRIM
Pressing this key allows adjusting the solo offset level applied in the moni-
toring, whenever PFL is active. The offset level is displayed in place of the
control room level. Turn the dB SPL control room level knob for solo offset
level adjustment.
LIVE
If active: Disables some functions potentially dangerous during live work,
such as 'talkback to masters' or 'solo in place'. It is also possible to use this
key to arm the cuelist, so that the NEXT and PREV desk keys are activated.
See static automation settings in
PFL BC
Activates a mode where PFL or SOLO on a channel is automatically canceled
whenever the channel fader is open. A setting in the 'Vista Desk Settings'
menu allows activating the function where the PFL/SOLO comes back after
the fader has been closed again.
CR INJECT
If active: PFL signals will be audible in the main control room speakers as
soon as any PFL function is activated. Channels with SOLO active are always
inserted into the control room.
SW V5.3
Vista 1 Digital Mixing System
chapters 4.4.4 and 4.4.4.5.
Desk Operation 2-27