General Info / Desk Operation; General; Utilization For The Purpose Intended; First Steps - Studer Vista 1 Operating Instructions Manual

2

General Info / Desk operatIon

2.1

General

2.1.1

Utilization for the purpose Intended

2.1.2

first steps

2.1.2.1

Unpacking and Inspection

2.1.2.2

adjustments, repair, Cleaning

Danger:
Replacing the Supply Unit:
Cleaning:
2.1.2.3

UsB sockets

Important
Document generated: 18.04.17
The Vista 1 mixing console is intended for professional use.
It is presumed that the unit is operated only by trained personnel. Servicing
is reserved to skilled technicians.
The electrical connections may be connected only to the voltages and signals
designated in this manual.
Your new mixing console is shipped in a special packing which protects the
units against mechanical shock during transit. Care should be exercised when
unpacking so that the surfaces do not get marred.
Verify that the content of the packing agrees with the items on the enclosed
shipping list.
Check the condition of the equipment for signs of shipping damage. If there
should be any complaints you should immediately notify the forwarding agent
and your nearest Studer distributor.
It is recommended to retain the original packing material because it offers the
best protection in case your equipment ever needs to be transported.
All internal adjustments as well as repair work on this product must be per-
formed by expert technicians!
The primary fuse is located within the power supply module and cannot be
changed. In case of failure, the complete power supply unit must be replaced.
Please ask your nearest Studer representative.
Do not use any liquids to clean the exterior of the unit. A soft, dry cloth or
!
brush will usually do.
For cleaning the display windows and screens, most of the commercially avail-
!
able window or computer/TV screen cleaners are suited. Use only a slightly
damp (never wet) cloth. Never use any solvent!
USB memory devices MUST NOT BE REMOVED from the socket DURING
!
DATA ACCESS – only remove any of them after its LED has stopped flash-
ing in order to avoid data loss!
SW V5.3
Vista 1 Digital Mixing System
Desk Operation 2-3