Studer Vista 1 Operating Instructions Manual page 241

Vista 1 Digital Mixing System
Rename UAD snapshot The UAD snapshot can be renamed to a more realistic and cue depending
name.
Enable UAD snapshot The Enabled checkbox is checked by default after an UAD event is created.
By unchecking it, the UAD snapshot will not get executed when the cue is
fired.
Update UAD snapshot Clicking the Update button will transfer all the current setting data from the
Real Time Rack to the desk, and the UAD snapshot of the currently selected
UAD event will be overwritten – the UAD snapshot gets updated.
Note :
There is no relation of the UAD snapshots to any kind of console isolation
states and filtering.
StripSetup Events Saved StripSetups created in the StripSetup window can be assigned to cues
as StripSetup events. By firing the cue, the selected StripSetup gets loaded
onto the desk. This is a great feature in rehearsed shows like theatre shows
or live broadcast shows, where several different StripSetups are required, to
automatically bring the desired channelstrips up onto the desk surface.
Clicking onto the StripSetup cue event icon shows a combo box in the Con-
figuration area of the cue list page. This is where you select the desired strip
setup file you want loaded for that cue.
TimeCode Events
The TimeCode trigger event allows cues to be fired by a timecode value. When
an external timecode is fed to the Vista console, TimeCode trigger events can
directly be created with the button Make & TC - Cue and Snapshot. The
current timecode is then stored as the trigger time for the newly created cue.
GC Operation 4-65
Document generated: 18.04.17 SW V5.3