Settings : Device Labels (Save And Apply); Settings: Use Devicelabels; Settings: Overwrite Channel User Label; Settings: Configure Exernalrouter I/O - Studer Vista 1 Operating Instructions Manual

Vista 1 Digital Mixing System
4.7.10

Settings : Device labels (Save and Apply)

4.7.11

Settings: Use Devicelabels

4.7.12

Settings: overwrite Channel User label

4.7.13

Settings: Configure ExernalRouter i/o

4.7.14

Settings: Connection Setup

4.7.15

Settings: Regenerate intelligent Fix labels

4-144 GC Operation
This menu item lets you set-up the console for use with Device Labels.
It is used for setup only !
For a detailed description, please refer to
This option must be checked for using the console with Device Labels.
It must be checked (active) for proper Device Labels functionality.
For a detailed description, please refer to
This option must be checked for using the console with Device Labels.
It must be checked (active) for proper Device Labels functionality.
For a detailed description, please refer to
This opens a dialog window for External Router I/O Configuration - but only
in the case if external router control is enabled on the system.
If this button is pressed, the D23m/D21m I/O system will be reinitialized.
This button is not used in normal operating mode, only when changes in the
I/O system have happened, this button can be used for trouble shooting.
Audio coming through the D21m I/O components is reaching the core over
Studer's proprietary HD (high density) link in case of the SCoreLive. This
link is present between the local hub(s) and the SCoreLive. Each link may
carry up to 96 audio channels. Instead of displaying these channel numbers
in the general patch, the software is able to give more intelligent names to the
input and output ports shown in the general patch. You will then see frame
numbers as well as card types and channel numbers within each card. This
generation is automatically active whenever the D21m I/O system is present
and the hub frame is connected to the console via a serial link. However, when
recalling a snapshot containing the 'non intelligent' fixed labels (e.g. from
older productions), this will overwrite the fixed labels as well and make the
'intelligent fixed labels' disappear. In this case, select Regenerate Intelli-
gent Fixed Labels and update this snapshot.
SW V5.3
chapter 4.4.2.6
chapter 4.4.2.8.
chapter 4.4.2.8.
Document generated: 18.04.17