Exit Vista Application - Studer Vista 1 Operating Instructions Manual

Vista 1 Digital Mixing System
4.5.11

Exit Vista Application

Shutdown System
Using Main Window Control
4-104 GC Operation
There are three possible ways of quitting the Vista Software application. It is
recommended to use the Application menu's Exit items : Exit GC or Shut-
down System.
Exit GC This action will close the graphical controller (Vista system application) while
simultaneously muting all monitoring outputs, and returning to the Windows
operating system. All other programs and applications continue to run.
This action will close the graphical controller (Vista system application) while
simultaneously muting all monitoring outputs. It also quits all other running
applications and the Windows operating system. The desk PC will then be
switched off.
In case an UPS (Un-interruptible Power Supply) is installed, and the associ-
ated utility is configured to do so, this will also turn off the UPS/PC combi-
nation automatically after a pre-set time period.
It is also possible to quit the Vista application by clicking on
control. There is no confirm box in this case, and the appli cation is terminated
immediately.
It could be potentially dangerous for your session if you click on
window control, because the application will be terminat ed, and audio will
no longer pass. However, the data that was in use will be written to the 'last
known session' and 'shutdown' files and will not be lost.
Note: It is possible for an expert to adjust settings in order to make the
box disappear.
SW V5.3
main window
main
close
Document generated: 18.04.17