Vista Fx; Introduction; Effect Routing - Studer Vista 1 Operating Instructions Manual

9

Vista FX

9.1

introduction

9.2

effect routing

Document generated: 18.04.17
Software V5.1 allows to have two powerful LEXICON
engines deeply integrated into the Vista 1 mixing system.
Effect processing engines are useful for any mixing application, but most
importantly for sound reinforcement and live broadcast productions. In gen-
eral, multi-effect units provide effects processing for the most commonly
used time based effects, such as : Reverb, Chorus/Flange and Delay. Each
effect processing engine supports up to 30 different professional LEXICON
effects, controlled from the intuitive Vistonics interface of the Vista 1 console.
The processing is carried out in the Vista 1 FX DSP units which are an inte-
gral part of every Vista 1. This hardware is based on the legendary Lexicon
DSP-platform, and therefore provide Lexicon effect type categories such as
:
• Reverb
• Delay
• Chorus
• Flanger
• Phaser
• Tremolo
• Vibrato
• Rotary
• Pitch Shift
• Detune
• De-Esser
As with most effect processors, the processing engine can be set-up for mono,
stereo and surround effect processing (surround is for reverb effects only).
In the Vista 1, there are two engines available, called "Engine A" and "Engine
B". One engine can get one of the following configurations :
• Dual Stereo
• Quad Mono
SW V5.3
Vista 1 Digital Mixing System
effects processing
®
Vista FX 1-3
®