Studer Vista 1 Operating Instructions Manual page 293

Typical fader start setup for two stereo sources (I77/I78 and I79/I80):
Document generated: 18.04.17
4.
The Triggers have to be set according to the application of the selected relay.
All Triggers always work in a logical AND fashion:
• The desired Source must be patched to the appropriate Channel (implicitly
understood and done in the Patch), and
There is the possibility to check up to five other Triggers to finally trigger the
relay:
• User key 1, and
• User key 2, and
• Input Selector, and
• Channel On (MUTE), and
• Fader open.
Any combination of the five possibilities above can be used. It is also possible
to select from a default list of pre-configured Trigger combinations:
• Fader start, or
• User Defined.
The typical Fader Start Trigger combination is:
• Input selector, and
• Channel on (MUTE), and
• Fader (open).
SW V5.3
Vista 1 Digital Mixing System
Fader Start
Trigger Defaults
GC Operation 4-117