Studer Vista 1 Operating Instructions Manual page 350

Vista 1 Digital Mixing System
Protocol Selection
Setup of rtpMIDI on Vista
System MIDI Port
7-6 DAW Control
Protocol selection (Mackie Control or Mackie HUI) is done in the Vista
Settings dialog. This is not done automatically but has to be decided by the
user with the help to the information given in
rtpMIDI (rtpMIDI is the current MIDI-over-Ethernet driver, that needs to be installed
on the Vista console PC)
• Install rtpMIDI v1.1.4.235 (requires Bonjour V2.0.2.0 or later) - for
installation details, please refer to the Vista Installation Note "Vista DAW
Comtrol with rtpMIDI"
Run rtpMIDI and create 4 Sessions using the [+]-Button. The sessions will
automatically get the name of the computer and will appear in the directory
window. Rename the sessions to Vista, Vista (1), Vista (2), Vista(3)
as shown below.
Enable the sessions with the checkmark in the order below - start with "Vista",
then "Vista (1)" ....
Make sure that the Windows operating system does not assign one of the
above MIDI sessions to the Windows default output device. A channel shift
might be the result of this faulty assignment.
SW V5.3
chapter 7.4:
Document generated: 18.04.17