Central Channel Processing Keys - Studer Vista 1 Operating Instructions Manual

2.2.4

Central Channel processing keys

Example 1:
Example 2:
Document generated: 18.04.17
GLOBAL VIEW: LABEL TYPE
Changes the label type of the second line in the generic display area to show:
• Device label (also referred to as user label)
• Fixed label (shows the input channel's number)
 GLOBAL VIEW: BUS ASN
Activates a 'bubble view' of the bus assignment throughout the whole console.
If the bay is locked, only the corresponding bay is affected.
This set of keys is used to switch processing on/off within one or several
channels. It also hosts keys to copy and paste settings between channels or
between the clipboard library and channels. As a standard the user selects a
channel first (pressing LINK / SEL) and then switches e.g. EQ On. If a gang
is made, the switching will happen on all member channels of the gang. As
soon as a local view change is done on another channel (e.g. touching the EQ
graphic in order to open the EQ view locally on a Vistonics screen), these set
will become active for that specific channel. After closing the EQ view, the
set is again dedicated to the channel(s) with LINK / SEL active. If several views
are opened on the Vistonics screens, the key set is following the principle of
'last wins'. Wherever a view has been opened last the CHANNEL PROCESSING
key set is active.
The user wants to activate the compressor/limiter in channel 10. In order
to do that he either presses LINK / SEL on channel 10 first, followed by the
COMP / LIM key on the central channel processing keys. Or he may open any
local views such as touching the dynamics curve on the touch screen (there-
fore opening the view of the dynamics section) and then presses COMP / LIM
on.
The user wants to switch on a low cut filter on channels 1-20.
The fastest way to do that will be to first create a gang of the channels 1 to
20 (press-hold LINK / SEL on channel 1, followed by LINK / SEL on channel
20). This will assign the central processing keys to the whole gang, so the
user can now press COMP / LIM on and have it activated on all ganged chan-
nels together. Finally the user may want to delete the gang by pressing any
LINK / SEL key.
SW V5.3
Vista 1 Digital Mixing System
Desk Operation 2-21