Multi-Format Panning Parameters - Studer Vista 1 Operating Instructions Manual

Vista 1 Digital Mixing System
3.4.4.3

multi-Format Panning Parameters

General PAN on/off
LFe on/off
LFe LeVeL Rotary
FRonT L-R Rotary
ReaR L-R Rotary
3-42 Parameters
Surround panning consists of two panning algorithms: Multi-format panning,
and VSP (Virtual Surround Panning). These support a variety of surround
formats and applications; in all these modes, an LFE (Low Frequency Effects)
control is available. Multi-format panning functions can be used only for
mono channel types.
Please note that the view below shows 5.1 panning format; for other panning
formats, one or more of the fields may be blanked.
is selected with the PAN hardware key above the Vistonics section.
On/off control for the Low Frequency Effects channel.
LFE level control from MUTE (i.e. –∞ dB) to +10 dB.
Within this section, no filtering is applied to the signal fed to the LFE bus.
This parameter controls the front panning between the left, (left-center, center,
right-center), and right channels in 1° steps. The contribution to the center
channel is determined by the CENTER rotary control.
F-R Rotary
This front/rear parameter provides panning between front channels (LCR)
and the rear channels (left and right surround) in 60 increments.
This parameter controls panning between the left and right surround channels.
SW V5.3 Document generated: 18.04.17