Vista 1 Digital Mixing System
Pro-Bel Set-up Dialog
4-146 GC Operation
[d950SerialPorts]
1= {p} COM1 baud=115200 parity=N data=8 stop=1
2= {b} COM6 baud=38400 parity=E data=8 stop=1
'b' is used to indicate Pro-Bel use. Only the COM ports defined in this way
will be available in the Pro-Bel set-up dialog.
With Pro-Bel Setup enabled
Setup - button.
When clicking on this button the system brings up the set-up dialog and enters
Pro-Bel set-up mode.
Targets with their respective connections can be selected by clicking on them
in the list on the general patch. Selected targets change their color to pink to
show their selection state.
SW V5.3
the Pro-Bel catecory displays the additional
,
Document generated: 18.04.17