Hierarchical Cgms - Studer Vista 1 Operating Instructions Manual

Vista 1 Digital Mixing System
4.6.1.4.5

Hierarchical CGMs

4-124 GC Operation
The Control Group Assignment window serves a similar function as the
SETUP: GROUPS key on the control surface, except assignments are made
via software, and the Control Group Filter window does not open.
To assign a channel to a Control Group, select a Control Group Master using
the pop-up menu in the field at the top of the window. Channels can be assig-
ned or de-assigned by double-clicking the channel's name. Keep in mind
that a channel can belong to only one Control Group at a time. If assigned,
a yellow N will appear in the box to the left of the channel name, and the
number of the Control Group will be displayed in the channel's fader. Control
Group Assignments are saved within snapshots and presets.
It is possible to have control group masters (CGMs) being a member of other
CGMs. The indication of the control group number on master channels has
therefore slightly changed: The green display next to the fader is constantly
showing to which master a channel belongs. If there is no further hierarchical
level above a CGM, this area is dark. The number of the CGM itself can be
seen in the second line of the label display area.
SW V5.3
This Channel is CGM No. ...
This Channel is Member of CGM No. ...
Document generated: 18.04.17