Studer Vista 1 Operating Instructions Manual page 219

Example 2
Document generated: 18.04.17
Goal The value of channel 3 should be reduced by 4 dB on 'snapshot #1', 'snapshot
#3', and 'snapshot #5'.
These snapshots currently contain the following fader values:
'snapshot #1': 0 dB; 'snapshot #3': –5 dB; 'snapshot #5': –10 dB.
Therefore, after the update they should contain the new, updated values:
'snapshot #1': –4 dB; 'snapshot #3': –9 dB; 'snapshot #5': –14 dB.
Procedure Make sure the Enable Trim mode option in the 'Option: snapshot Auto-
mation' menu is set.
Recall any snapshot.
Hold ISO on channel strip 3. Touch the fader twice in order to put it into Trim
mode.
Lower the fader of channel 3 by 4 dB (the exact trim value will be displayed
on the Vistonics screen).
Select 'snapshot #1' with the touch pad.
Hold the CTRL key on the control bay, and select 'snapshot #3' and 'snapshot
#5'.
Click on 'Recall and Update', and confirm that you want to overwrite these
snapshots.
The console will automatically recall and update the selected snapshots.
Since the console assumes that the controls being in Trim mode have been
placed into this mode for the purpose of this update, the operator will be asked
whether these controls should be taken out of Trim mode afterwards.
SW V5.3
Vista 1 Digital Mixing System
GC Operation 4-43