Useful Information; Labels In Strip Setup - Studer Vista 1 Operating Instructions Manual

Digital mixing system
Hide thumbs Also See for Vista 1:
Table of Contents

Advertisement

Vista 1 Digital Mixing System
4.4.6.1.4

Useful Information

4.4.6.1.5

Labels in Strip Setup

4-86 GC Operation
• Any DSP Channel can be assigned to any Channel Strip on the virtual control
surface.
• Any DSP Channel can be assigned more than once to several different Chan-
nel Strips on any Section.
• It is not necessary to assign all DSP Channels available in the currently loaded
configuration; then, however, there will be no control of these channels from
the control surface.
• Assigning DSP Channels to Channel Strips has no affect on audio. It is purely
a viewing function, and therefore changing the strip setup can be done at any
time whilst operating the console.
• An indication is provided to highlight which bays are currently displayed on
the physical console. These displayed bays are in dark gray.
The most useful label type to show in strip setup is the 'Inherited Label'.
This is the session label of the source that is patched to a DSP channel and
also relates to the large label in the channel strip display. See
for more information regarding the Vista labeling system. For this reason, a
checkbox is provided which locks the label type view of Strip Setup to show
the 'Inherited labels' (see below). Check the 'Show Inherited Labels' box to
always show Inherited Labels in the Strip Setup window.
If the 'Show Inherited Labels' box is not checked, the label type shown in the
Strip Setup will follow the choice of the label displayed by the smaller label
in the Channel Strips. See
The following channel types can directly be labeled in the Strip Setup by
right-clicking the desired channel, and then selecting Edit User Label.
• DAW channels
• CGM/VCA masters
• Aux masters
• Matrix masters
• Group masters
• Masters
Important
Input channels are the only channels that cannot be labeled in the strip setup.
This is because the input channels use a special mechanism always propagat-
ing the name of the Input interface (e.g. mic input) to the channel patched to
SW V5.3
chapter 4.4.2.6
for a description of this label.
chapter 4.4.2.6
Document generated: 18.04.17

Advertisement

Table of Contents
loading

Table of Contents