Studer Vista 1 Operating Instructions Manual page 62

Vista 1 Digital Mixing System
Example 1:
Example 2:
2-22 Desk Operation
 HI CUT
 LO CUT
 DELAY
 INS
 COMP / LIMIT
 EXP / GATE
 EQ
 PAN
Audio processing functions on/off; if lit, the corresponding audio function is
activated. If dark, the function is bypassed. For more details about functions
and their parameters refer to
 (Copy/Paste)
Dedicated to each audio function, these keys act as copy (first step) and paste
(second step) at the same time. The philosophy of using the central key set
for copying and pasting is the same as when switching processing on and off.
First select source channel, press copy/paste of the corresponding function,
then select destination channel and press the same copy/paste  key again
in order to paste into this channel.
After having copied the value of the source channel into the internal clipboard
(first press), the source channel key is fully lit while all possible destination
channels are half-lit (see this after changing LINK / SEL). This guides the
user to select the destination channel efficiently. After having selected one of
them as destination key (second press), the copy/paste function is terminated.
Nevertheless there are several ways to paste the clipboard value to multiple
channels:
• Create a gang and paste the value into one of the members
• Hold MULTI SEL before pasting to channels of your choice.
The user wants to copy the EQ settings of channel 8 into channel 10.
1 Press LINK / SEL of channel 8 – or open e.g. the EQ view on channel 8 by
pressing the EQ graphics on the touch screen. Alternatively any view of
channel 8 could be opened, e.g. by touching the dynamics or pan graph-
ics – or selecting CHANNEL or MISC view on that channel.
2 Press Copy/Paste key next to EQ, located on central CHANNEL PROC-
ESSING keys.
3 Press LINK / SEL of channel 10 – or open e.g. the EQ view on channel 10
by pressing the EQ graphics on the touch screen. Alternatively any view of
channel 10 could be opened, e.g. by touching the dynamics or pan graph-
ics – or selecting CHANNEL or MISC view on that channel.
4 Press Copy/Paste key next to EQ, located on central CHANNEL PROC-
ESSING keys.
The user wants to copy a low cut filter from channel 1 into channels 11-20.
1 Select channel 1 by any of the ways described in example 1.
2 Press Copy/Paste  key.
3 Create a gang between channels 11 and 20 by press-and-hold LINK / SEL
on channel 11, then press LINK / SEL on channel 20.
4 Press Copy/Paste key again.
5 Delete the gang by pressing any LINK / SEL key.
SW V5.3
chapter 3).
Document generated: 18.04.17