Shared Delay - Studer Vista 1 Operating Instructions Manual

Vista 1 Digital Mixing System
Generator / Signal
Generator / Defaults
4.6.1.2.3

Shared Delay

4-110 GC Operation
19.95 kHz.
Selects the waveform of the test signal generator, from Sine Wave, White
Noise, and Pink Noise.
Sets the test signal Generator's level and frequency defaults by using the
arrow buttons to adjust the default values.
To quickly apply a level or frequency default, rather than to adjust it manually,
click on the appropri ate Defaults button. Default levels can be set in 1 dB
steps, from –90 to +10 dB
the Defaults controls. Default frequencies can be set in 1/12
from 19.95 Hz to 19.95 kHz.
 Tip By default, the Test Signal Generator is patched to GEN (the third channel
input) of all channels. It also appears as a signal source in the General Patch
and can be patched from there to any desired target.
The settings of the Stereo and Multi-format Monitoring Delays (for control
room, PFL, headphones etc.) are made in the same dialog window where the
'Shared Delay' processes are set.
SW V5.3
. The Generator Level cannot be turned off from
FS
octave steps
th
Document generated: 18.04.17