Import; Export - Studer Vista 1 Operating Instructions Manual

4.5.4

import

4.5.5

Export

Document generated: 18.04.17
If you move production data between different consoles, it is advisable not to
restore certain files onto the destination console, since it may have different
hardware. This is valid in particular for the
be asked whether you want to restore these files as well; in this case answer
negative if the two consoles are not identical in terms of monitoring.
Using the Import utility in the Application menu, snapshots, presets, mixes,
titles and user labels can be imported.
Import
This action is used to select the type of data you wish to import. Once the
type of data is selected, an open window appears allowing to select the data
source. The following rules apply when using the Import utility:
• Snapshots and mixes can only be imported into an open title
• Imported presets will be saved with the current DSP configuration
• Items can be renamed as the are imported
• A title will need conversion if it is imported for use with a different DSP
configuration
Note Importing a snapshot, preset, mix, and/or title will not autmatically make it
the current one. For example, a snapshot will not be applied to the console
upon being imported. It must be recalled, in addition, using the snapshot page.
Using the Export utility in the Application menu, user labels as well as the
fixed labels of sources can be exported.
To export fixed labels of sources can be useful when creating ProBel confi-
guration files.
SW V5.3
Vista 1 Digital Mixing System
files. You will
monitoring.ini
GC Operation 4-101