Vista 1 Digital Mixing System
When using the fold button to go back to the normal CHANNEL VIEW, the
trimmed input gains are kept and the main input gain control will then just
apply an offset to the individual gains. Any trimmed input legs are then listed
underneath the dB value. (As shown in the example above, where Ls and Rs
are trimmed).
Also in the CHANNEL VIEW, there is an additional selection possibility in the
touch area that allows modifying the EQ and dynamics parameters indivi-
dually for the Front, Center, LFE and Rear signals.
Parameters 3-59
Document generated: 18.04.17
SW V5.3