Monitoring And Communication - Studer Vista 1 Operating Instructions Manual

Vista 1 Digital Mixing System
1.5

Monitoring and Communication

Monitoring
Talkback and Signaling Block Diagram
Studio Monitor A
Control Room
GPI X Live
Vista 1 Desk
Talk to
Chan Out
Grp 01
GPI X GPI X
Legend:
GPI 1 = GPI already configured in .ini files
GPO 2
= GPO already configured in .ini files
1-20 Introduction
The Control Room (CR) monitoring section provides control of two different
speaker systems; one of them is multi-channel, the other one is two-channel
stereo and is normally used for the near field monitor speakers. All internal
digital sources can be assigned to any of the source selector keys, and up to
32 source selector keys are available. A headphone socket for control room
monitoring is located at the console's right front edge below the hand rest.
The Studio Monitor is configurable in the same way as the CR monitor sec-
tion. Two stereo loudspeaker pairs are supported.
Talkback
An extensive talkback system is implemented within Vista. The talkback
source can be either the desk operator's microphone or an external producer
microphone. Several destin ations, such as busses, direct outputs, auxiliaries,
groups, and master outputs are available block.
Each channel is fitted with a talkback key that activates talkback to the direct
output of the corresponding channel and, if the channel is an N–X owner, to
the N–X output. For details see the block diagram below.
Studio A
e.g. Speaker
CR Monitor
GPO 1 GPO X GPO X
Studio A Studio B
Signaling Keys
Red
Light
GPI X
SIG1
GPI X
GPI X
SIG2
GPI X
Talk
Producer area (in control room or separate room)
Channel
Talk to Channel
Mute
Mute
Chan Out
Grp N Grp 01 Grp N
GPI X GPI X GPI X GPI X
= GPI prepared to use, bot not
GPI X assigned to signaling card.
Can be configured in .ini files
= GPO prepared to use, bot not
GPO X
assigned to signaling card.
Can be configured in .ini files
SW V5.3
Using Desk-Internal GPIO
Studio Monitor B
GPO X
GPO X
Red
Light
GPO 2
SIG1
Talk to Talk to
AUX1
preselected
GPO 3
SIG2
Talk to
AUX3
Talk
TB Keys
Desk
Operator
Foot Switch
Talk to
GPI X
Studio
A
Talk to
GPI X
Studio
B
Talk to Talk to Talk to
AUX 1 AUX 2 AUX 3
GPI X GPI X GPI X
Already configured:
GPI 1 Footswitch to talk to preselected
GPI 2 CR DIM
Studio B
e.g. Speaker
GPI 2
DIM
GPI 1
Talk to
AUX2
Talk to
AUX4
TB Mic
PFL Out
GPO X
GPO X
Producer
Talk to Talk to
AUX 4
preselected
GPI X GPI X
GPO 1 Live Key on Desk
GPO 2 Signaling 1 Studio A
GPO 3 Signaling 2 Studio A
Document generated: 18.04.17