Studer Vista 1 Operating Instructions Manual page 131

GaTe hyst on/off
Vintage Dynamics Section
Standard View
GaTe ThRs Rotary
GaTe aTTn Rotary
GaTe aTCK Rotary
GaTe hoLd Rotary
'Shift' View eXP ThRs Rotary
eXP RaTIo Rotary
eXP aTCK Rotary
eXP hoLd Rotary
Document generated: 18.04.17
The gate hysteresis function provides an offset between the un-mute and mute
thresholds. So the gate will remain open (un-muted) at a level slightly lower
than the one required to open it in order to avoid effects such as chattering.
There are two different views for the vintage expander/gate view; one of them
(below left) is displayed when pressing the EXP GATE hardware key, and the
other one (below right) when pressing  (Shift) before the EXP GATE key.
Standard View:
The gate threshold level can be adjusted in 1 dB steps from 0 dB
–96 dB .
FS
The gate attenuation level can be adjusted in 1 dB steps from 0 dB
+60 dB .
FS
The gate attack time can be adjusted in 64 steps within a range of 0.2 ms to
5 ms.
The gate hold time can be adjusted in 64 steps from 0 ms to 2000 ms.
The expander threshold level can be adjusted in 1 dB steps from 0 dB
–96 dB .
FS
The expander ratio level can be adjusted from 1:1 (no expansion) to 1:40
(heavy expansion).
The expander attack time can be adjusted in 64 steps within a range of 0.2 ms
to 5 ms.
The expander hold time can be adjusted in 64 steps from 0 ms to 2000 ms .
SW V5.3
Vista 1 Digital Mixing System
'Shift' View:
Parameters 3-19
to
FS
to
FS
to
FS