Amplitude Panning Parameters - Studer Vista 1 Operating Instructions Manual

3.4.4.1

Amplitude Panning Parameters

LR Panning Parameters for Mono Channels:
General PAN on/off
Pan Rotary
LR/direction Panning Parameters for stereo Channels:
PAN on/off
InP dIR / BaL on/off
Document generated: 18.04.17
Mono Channels:
Mono channel LR PAN has only one panning function: left/right panning. It
is useful for left/right panning to stereo master or group busses, or for odd/
even panning to group or multi-track busses.
is selected with the PAN hardware key above the Vistonics section.
The rotary encoder provides left/right (odd/even) panning control in 1° steps
from –30° (fully left) to +30° (fully right).
Stereo channel DIR/BAL PAN is a stereo direction panning function. It is
useful for controlling the direction of stereo signals to master, group, and
multi-track busses.
DIR WIDTH is identical to the DIR pan with an optional width control added
(depending on the currently loaded configuration).
is selected with the PAN hardware key above the Vistonics section.
Activates the input balance or the input direction control, depending on the
function selected with INP BAL / INP DIR. This function is placed within
the signal path of the channel before the mono switch, selectable in the '2CH
mode' section.
SW V5.3
Vista 1 Digital Mixing System
Stereo Channels:
Parameters 3-39