Table of Contents
Advertisement
9.3.6.5
tap Control
9.3.7
Copy/paste
Clipboard Library
Document generated: 18.04.17
On the category Delay, most effect types are providing an assignable Tap
control.
Tapping :
Assigns the Tap control to one of the USR buttons on the consoles channel
strip. Range [No, USR1, USR2]
By chosing USR1 or USR2, the Tap control can be done with either of the
two user buttons on the consoles channel strip, above the fader. The button
can then be tapped in order to configure the resulting delay time. As an optical
feedback, the button is blinking with the configured time intervall.
With the Copy button, the current effect type, with its current parameter set-
tings is being copied into the clipboard. As now the clipboard library window
opens up automatically, the settings can be pasted into the clipboard library.
As an alternative, the settings can also be copied into a channel which is also
assigned to an effect. To achieve this, the Paste button can be used.
The clipboard library has been extended by a new tap called FX. Here all
effect library entries are stored.
Also a new clipboard library button has been implemented - the copy button
next to it can be used to copy library entries into the clipboard, and then into
a the desired channel.
SW V5.3
Vista 1 Digital Mixing System
Vista FX 1-19
Advertisement
Chapters
Table of Contents
