Technical Specifications (Subject To Change Without Prior Notice) - Studer Vista 1 Operating Instructions Manual

Vista 1 Digital Mixing System
2.1.3 technical specifications
Mic / Line Input Module
General Conditions:
Input Impedance
Gain
Maximum Input Level
Frequency Response
THD + Noise
Equivalent Input Noise / Noise Figure (NF) R
Crosstalk
Input Delay
Common Mode Rejection Ratio (CMRR)
Line Output Module
Output Impedance
Frequency Response
THD + Noise
Crosstalk
Output Level
Output Delay
AES / EBU Input / Output Module
Input/Output Impedance
Input Sensitivity
Ouptut Level
THD + Noise
SRC Range
Input Delay
Power Supply
Primary Input Voltage Range
Power Consumption Vista 1
Power Consumption Vista 1
Ambient Conditions
Operating Temperature Range*
Relative Humidity*
* Also refer to 'Appendix 1: Air Temperature and Humidity' on page X at the beginning of this manual
Weights
Vista 1 Console, 22-Fader Version
Vista 1 Console, 32-Fader Version
2-4 Desk Operation
(subject to change without prior notice)
Conditions / Details
Gain Setting 15 dBu 0 dB
(Electronically Balanced)
for 0 dB (adjustable in steps of 1 dB)
FS
–11 dB Gain, R = 600 W
source
0 dB Gain, R = 150 W
source
20 Hz to 20 kHz, 40 dB Gain
30 Hz to 20 kHz, 40 dB Gain
1 kHz, –1 dB
FS
1 kHz, –9 dB (Nominal Level)
FS
20 Hz to 20 kHz, –30 dB
FS
= 200 W, Gain ≥ 60 dB
i
1 kHz
30 Hz to 20 kHz, All Gain Settings
1 kHz, –11 dB to +26 dB Gain
Conditions / Details
(Electronically Balanced)
20 Hz to 20 kHz
–1 dB , 1 kHz
FS
–30 dB , 20 Hz to 20 kHz
FS
1 kHz
R ≥ 600 W; Globally adjustable with hardware switches
L
(steps: +24, +22, +20, +18, +15, +12, +9, +6 dBu)
Conditions / Details
into 110 W
16
: D =
r > r
r
S_IN S_OUT
S_IN
Conditions / Details
Auto-ranging, with power factor correction (PFC); EN/UL
approved. 2 power inlets provided for redundancy.
22-Fader Version
32-Fader Version
Details
non-condensing
SW V5.3
unless otherwise noted.
FS
32
+ [s]
r < r
r
S_IN
S_OUT
Value
3.6 kW
–11 to +75 dB
+26 dBu
+15 dBu
+0 / –0.9 dB
+0 / –0.6 dB
≤ –87 dB
≤ –94 dB
< –102 dB
FS
–127.6 dBu / NF ≤ 2
≤ –100 dB
12 samples
250 μs @ 48 kHz
> 46 dB
60 dB typ.
Value
50 Ω
+0 dB / –0.3 dB
–90 dB
–103 dB
–115 dB
+6 to +24 dBm
for 0 dB
FS
10.4 samples
217 μs @ 48 kHz
Value
110 W
min. 0.2 V
RMS
4.0 V
RMS
max. –115 dB
22-108 kHz
48
: D = [s]
r
S_OUT
S_IN
Value
100 to 240 V AC ± 10%
50 to 60 Hz
220 W typ., 300 W peak
190 W typ., 250 W peak
Value
0 to 45 °C
32 to 113 °F
95%
Value
54 kg
60 kg
Document generated: 18.04.17