Panning Parameters - Studer Vista 1 Operating Instructions Manual

3.4.4

Panning Parameters

LR Pan for Mono Channels
Document generated: 18.04.17
There are several panning options available. These range from a simple
mono-to-left/right pan over a stereo direction pan with width control to the
sophisticated family of Virtual Surround Panning (VSP) modules. Left/Right
and VSP functions are available for mono input, group, multi-track input, and
multi-track monitor channels. Direction and Direction with Width functions
are available for stereo input and group channels. In addition, there exist
upmix panning functions for easily inserting stereo sources into surround
mixes.
The panning functions can be controlled by the Vista's motorized joystick. To
assign a channel to the joystick, press the joystick FOLLOW key (it will light)
and then the LINK/SEL key for the desired channel. The joystick can be used
to automate panning functions and then be reassigned to another channel by
pressing the LINK/SEL key of this channel.
The PAN key in the CHANNEL PROCESSING area can be used for activating/
note
deactivating for activating or deactivating the complete panning section of
a channel (or a gang of channels) selected with LINK/SEL, in addition to the
individual On/Off keys for the panning parameters.
If the PAN key is de-activated, the channel signals are directly fed to all
assigned busses, without being influenced by any panning.
The LR panning function is a simple PAN pot entio meter controlling the
contribution of the mono signal to the odd and even or left and right busses.
• PAN ON/OFF
• PAN function: Mono direction in 1° steps from –30° (L) to +30° (R).
SW V5.3
Vista 1 Digital Mixing System
A
Direction
Left
–30° +30°
Listening Position
Right
Parameters 3-37