Studer Vista 1 Operating Instructions Manual page 129

Standard Dynamics Section (left):
LIM ThRs Rotary
LIM on/off
LIM aTCK Rotary
CMP ThRs Rotary
CMP on/off
CMP RTIo Rotary
Vintage Dynamics Section (right):
CMP ThRs Rotary
CMP RTIo Rotary
CMP peak/RMs
CMP aTCK
MKUP GaIn auto on/off
MKUP GaIn Rotary
Document generated: 18.04.17
The limiter threshold can be adjusted in 1 dB steps from 0 dB
–48 dB . The limiter threshold corresponds to the output level.
FS
Individual limiter on/off control.
The limiter attack time can be adjusted in 9 steps within a 200 µs to 1 ms
range.
The compressor threshold level can be adjusted in 1 dB steps from 0 dB
–96 dB .
FS
Individual compressor on/off control.
The compressor ratio can be adjusted from 1:1 (no com pression) to 20:1
(heavy compression).
The compressor threshold level can be adjusted in 1 dB steps from 0 dB
–96 dB .
FS
The compressor ratio can be adjusted from 1:1 (no com pression) to 40:1 (extra
heavy compression).
Level detection mode: peak or RMS
The compressor attack time can be adjusted in 64 steps within a range of
0.2 ms to 250 ms.
'auto on' automatically compensates a level loss caused by the dynamics
processing. 'auto off' activates the manual MKUP GAIN rotary control.
To manually compensate a level loss caused by the dynamics processing,
adjustable in 1 dB steps from 0 through +24 dB.
SW V5.3
Vista 1 Digital Mixing System
Parameters 3-17
to
FS
to
FS
to
FS