Studer Vista 1 Operating Instructions Manual page 368

Vista 1 Digital Mixing System
8-12 RELINK
Start 'Config tool for DNet applications' in the Vista console's C: drive
(C:\Release ConfigTool\ConfigTool.exe)
Select one of the DNet systems available in the network and the appropriate
Vista system.
If the Vista or the other connected systems do not appear verify the settings
in the Container.ini file.
In the configuration tool, go to Physical Connections. Under Destination
all HD links within your system are listed.
Select the physical inputs to be used as tie lines. Once they are configured as
tie lines, they will no more be visible in the Vista general patch. Configura-
tion always takes place on the consuming (or target) system. Only the tie line
inputs need to be configured, i.e., the tie lines that are directed towards the
target system. The tie lines that go away from this system are configured as
inputs on the other systems, such as the router.
Select the appropriate system (e.g. 'Star router', as shown below):
SW V5.3 Document generated: 14.04.17