Setting Up A Mute Group - Studer Vista 1 Operating Instructions Manual

2.2.5.9.3

Setting up a Mute Group

Document generated: 18.04.17
Press the SETUP: GROUPS key on the control bay. The mute group master
keys (dedicated MUTE GROUPS M1...M8 keys, and, if defined, keys M9...M16
in the SOURCE SELECTOR area, see above) will be half-lit.
Select the mute group you want to setup.
A dialog will pop up on the Graphical Controller screen, allowing you either
to add all currently muted channels on the console to this mute group with
one touchpad click, or to clear all members from the selected mute group.
You may also select or deselect members using their LINK / SEL key.
Press the mute group master key again in order to select another one. Please
note that hierarchies can be built up as well. In other words, a mute group
may contain individual channels as well as another mute group master. Hier-
archies are not indicated on the desk once the set-up menu is quit. The area
below the channel labels indicates whether a channel is a member of one or
multiple mute groups.
This Channel is Part of Mute Groups 1, 3, and 8
Press SETUP GROUPS again in order to leave the setup mode.
Assignment of channels to mute groups are saved within a so-called 'start
snapshot' of each title. I.e., this information is saved once per title when the
title is closed.
SW V5.3
Vista 1 Digital Mixing System
M 9 M 10
M 13 M 14
M 11 M 12
M 15 M 16
Desk Operation 2-35