Theatre Cue List - Studer Vista 1 Operating Instructions Manual

Vista 1 Digital Mixing System
4.4.5.2

Theatre Cue list

4-56 GC Operation
In order to activate the 'theatre cue list' functionality, enter the Ribbon tab
Snapshot, category Options, opening the "Snapshot Automation Options"
menu and tick the Enable Theatre Cue List item (the further menu options
are described in chapter
the screenshot below. A detailed theatre workflow tutorial is given in
4.4.5.3.
In addition, the D950system.ini file must be modified by the system
administrator with the following entry: [options] - TheatreMode=Yes.
The Virtual Vista application not only lends itself for offline system setup,
but also for preparing a theatre cue list for a new show, while e.g. the console
is still used for the show currently played. For details of Virtual Vista, please
refer to chapter 2.2.12.
The theatre cue list contains the Snapshots, Events and Configuration areas
at its left. The Snapshots area shows the currently available console snap-
shots; they can be dragged-and-dropped into the desired cue row of the cue
list's # column. The Events area allows dragging-and-dropping the desired
events into the cue list's Events column. If one of the events is selected,
the Configuration area shows the settings and options useful for the current
SW V5.3
4.4.5.2.15). The cue list window looks similar to
chapter
Document generated: 18.04.17