Studer Vista 1 Operating Instructions Manual page 389

Category
Loading an Effect Type :
Document generated: 18.04.17
Effect Type Mix
Effect Parameters
To load an Effect Type, first the effect Category has to be chosen.
With the second Vistonics element, the Effect Type can be chosen. The list
of Effect Types which are available in the chosen category can be scrolled
through with the rotary. Once the desired Effect Type has been found, it can
be loaded by pressing the Load button.
As soon as an Effect Type is loaded, it's control parameters are shown on
the Vistonics area. If then the user scrolls further through the Effect Type
list, the parameters disappear again, but they will come back when the before
SW V5.3
Vista 1 Digital Mixing System
On/Off
Copy/Paste
Vista FX 1-13