Studer Vista 1 Operating Instructions Manual page 240

Vista 1 Digital Mixing System
UAD Snapshot Events
4-64 GC Operation
All channels currently muted are indicated in red. The ones being part of a
VCA group have the group number in their upper part. When right-clicking
on one of the channels, a list with all group assignment possibilities pops up;
a channel can also be muted or un-muted without an assignment to a VCA
group.
A detailed theatre workflow tutorial is given in
From Vista SW version V5.2 onwards, Soundcraft's Real Time Rack Plug-in
engine is supported.
To store and recall Real Time Rack effect parameters, an event type called
"UAD" has been introduced. By dragging and dropping this event, Real Time
Rack-data can be assigned to individual cues.
Every time when a UAD event is dragged to a cue, the Real Time Rack will
transmit all data to the Vista desk where the data gets stored into the event as
an UAD snapshot.
If a cue with an active UAD event gets fired, all the stored UAD snapshot data
will be applied to the Real Time Rack. This includes plug-in type assignment
in the 16 channels of the engine as well as all the parameters.
By clicking onto the assigned UAD event of a cue, the Configuration area
will show the details.
SW V5.3
chapter 4.4.5.3.
Document generated: 18.04.17