Monitoring/Talkback Inputs/Outputs; Vista 1 Mono/Stereo/Foh/Monitor' Configuration Templates - Studer Vista 1 Operating Instructions Manual

Vista 1 Digital Mixing System
2.1.5

Monitoring/talkback Inputs/outputs

2.1.5.1

'Vista 1 Mono/stereo/foh/Monitor' Configuration templates

2-12 Desk Operation
The monitoring and talkback input and output assignment is not fixed but
depends on the currently loaded desk configuration and on any personal
changes made to it later.
The next two paragraphs show the monitoring/TB I/O factory defaults. Please
note that the range of configuration templates will grow with time, and there
also may be some future changes and modifications to these default assign-
ments.
The monitoring and TB I/O connector assignment for the mono, stereo and
PA configurations is identical, according to the information given below.
Format
CR Mon Main stereo
CR Mon
stereo
PFL/Nearfields
CR Meter stereo
Studio A Mon stereo
Studio B Mon stereo
Studio A Meter
Studio B Meter
Mon Insert Send stereo
Mon Insert Return stereo
TB Mic mono
Items marked by (inactive) in the table and in white in the drawing above
are preconfigured in the mon.ini file; they can be activated by deleting the
corresponding comment marks.
SW V5.3
Analog I/O
LineOut 25, 26
LineOut 31, 32
- AES Out 5/6 (inactive)
LineOut 27, 28
LineOut 29, 30
-
-
- AES Out 15/16 (inactive)
- AES In 15/16 (inactive)
Mic/Line In 32 (inactive)
Document generated: 18.04.17
Digital I/O
-
-
-
-
-
-
-