Studer Vista 1 Operating Instructions Manual page 173

Vista 1 Digital Mixing System
After the individual setting has been made, pressing VIEW: CHANNEL again
switches back to the standard channel view. In our case (where the front and
LFE channels of Inp x 1 have individual dynamics settings), the dynamics
field then displays the standard dynamics curve with supplementary, small
L, R and Lf characters, indicating that the front and LFE dynamics settings
are different from the displayed curve. A gain reduction bargraph is shown
at the left of each of the four individual dynamics icons.
Individual EQ settings for the different surround signal legs can be adjusted
and are indicated in the same way.
Parameters 3-61
Document generated: 18.04.17 SW V5.3