Studer Vista 1 Operating Instructions Manual page 150

Vista 1 Digital Mixing System
LR Pan for stereo Channels
Virtual surround Panning (VsP)
Format
Algorithm: 2-CH to
7.1-CH
Multi-Format
X
Pan
VSP Pan X
3-38 Parameters
The PAN ON/OFF and PAN functions are extended to enable working with
either standard (L/R) stereo or with MS (mono/side) signals. In addition,
features are available to increase the stereo image manipulation possibilities,
such as
• Input direction or
• Input balance,
• Stereo width (pan width), and
• Stereo direction.
Whether the stereo width function is available depends on the currently loaded
configuration.
Various surround panning algorithms can be used for mono input, group,
multi-track input, and multi-track monitor channels; this depends on the cur-
rently loaded configuration.
Basically, two different surround panning algorithms are available: Multi-
format pan, and VSP (Virtual Surround Panning), see table; some more
information on these algorithms is given in the 'Parameters' sections below.
LCR, F/B,
Divergence
Ls/Rs Pan
X X
X X
Depending on the currently loaded configuration, one of the or both algo-
rithms above may be present in the console at a time.
SW V5.3
B
A
Direction
Left
–30°
Listening Position
Seamless Center
Pan Mode
Channel Usage
X Amplitude
Amplitude, HRTF,
X
Sphere, ORTF, AB
Right
+30°
VSP Controls:
Ambience, Distance,
Absorption, Room Size
–
X
Document generated: 18.04.17