Studer Vista 1 Operating Instructions Manual page 121

Vista 1 Digital Mixing System
a InseRT on/off (Not supported by transformer-balanced microphone pre-amplifier cards
A949.0447, as well as 16 channel HQ mic/line input modules). An analog
insert point is made available by inserting an optional analog insert card. Its
send output is always active at line level, and the return path may be activated
by the corresponding switch on the console.
MIC CTRL Free/other/owned Toggle switch for remote control of the analog mic/line input parameters. In
case of I/O sharing operation this switch is also used for the mic takeover
procedure (refer to chapter 8.3).
Parameters 3-9
Document generated: 18.04.17 SW V5.3